Conference Papers

2013

Torholm S. The Glasgow/Maastricht Foot model. Paper to be presented at the 8th Combined Meeting of Orthopaedic Research Societies, 13-16 October 2013, Venice, Italy

Oosterwaal M. Predicting the functional consequences of an insole using a novel multi-body model of the foot. Paper to be presented at the 8th Combined Meeting of Orthopaedic Research Societies, 13-16 October 2013, Venice, Italy

Woodburn J. A-FOOTPRINT; clinical use of foot models in RA treatment. Paper to be presented at the 8th Combined Meeting of Orthopaedic Research Societies, 13-16 October 2013, Venice, Italy

Pallari J. 3D Printing Additive Manufacturing and P&O - where are we now? Paper to be presented at the International Scoiety for Prosthetics and Orthotics Canada Symposium, 4-5 October 2013, Ottawa, Canada

Pallari J. Foot and ankle-foot orthotic development utilising additive manufacturing in the A-FOOTPRINT project. Paper presented at the TCT Show + Personalize, 25-26 September 2013, Birmingham, United Kingdom

Telfer S. Ultrasound based non-invasive method for quantifying soft tissue artefact during intrinsic foot motion. Paper presented at 22nd Annual Meeting of the European Society for Movement Analysis in Adults and Children, 2-7 September 2013, Glasgow, United Kingdom

Muraru L, Creylman V, Peeraer L. Accurate ankle foot orthotics through additive manufacturing. Paper presented at 19th Congress of the European Society of Biomechanics, 25-28 August 2013, Patras, Greece

Munguia FJ, Dalgarno KW, Pallari J. Advanced orthotics via additive manufacturing: from low-cost to high-end design. Paper presented at 19th Congress of the European Society of Biomechanics, 25-28 August 2013, Patras, Greece

Munguia J, Dalgarno KW. Ankle Foot Orthotics Optimization by the means of Composite Reinforcement of Free-Form Structures. Paper presented at the 24th Annual International Solid Freeform Fabrication Symposium: An Additive Manufactuing Conference, 12-14 August 2013, Austin, Texas, USA

Woodburn J. Recent Advances in Orthoses. Paper presented at Scottish Post Polio Network Scottish Orthotic Conference Programme, 27 April 2013, Glasgow, United Kingdom

Telfer S. Kinematic and kinetic dose-response effects of customised foot orthoses. Paper presented at the 12th Annual Clinical Movement Analysis Society UK and Ireland, 11-12 April 2013, Glasgow, United Kingdom

Oosterwaal M. Characterizing soft-tissue material properties of the plantar tissue from CT data and finite element analysis. Paper presented at the 4th Dutch Biomedical Engineering Conference, 24-25 January 2013, Wijk aan Zee, The Netherlands

Oosterwaal M. The Glasgow-Maastricht Foot Model - a 26 Segment Foot. Paper presented at the 4th Dutch Biomedical Engineering Conference, 24-25 January 2013, Wijk aan Zee, The Netherlands

2012

Oosterwaal M. Assessment of the mechanical properties of plantar tissue by a combined CT imaging and modelling approach. Paper presented at the European Orthopaedic Research Society 20th Annual Meeting, 26-28 September 2012, Amsterdam, The Netherlands

Telfer S. Personalised Foot Orthotics with Embedded Temperature Sensing: Proof of Concept and Correlation with Activity. Paper presented at the International Society for Prosthetics and Orthotics UK Member Society 40th Anniversary Meeting, 27-28 September 2012, Sheffield, United Kingdom

Oosterwaal M. Assessment of the mechanical properties of plantar tissue by a combined CT imaging and modelling approach. Paper presented at the European Orthopaedic Research Society 20th Annual Meeting, 26-28 September 2012, Amsterdam, The Netherlands

Munguia J. Productivity considerations for additive manufacturing of customised orthotics (part of the A-FOOTPRINT Project - An Industry/Academia Medical Mass Customisation Project Symposium), Orthopadie + Reha-Technik 2012, 15-18 May 2012, Leipzig, Germany

Oosterwaal M. The integration of forward and inverse multi-body models and finite element methods for optimal (A)FO design (part of the A-FOOTPRINT Project - An Industry/Academia Medical Mass Customisation Project Symposium), Orthopadie + Reha-Technik 2012, 15-18 May 2012, Leipzig, Germany

Telfer S. Mass customisation systems for foot and ankle orthoses: moving the technology towards clinical practice (part of the A-FOOTPRINT Project - An Industry/Academia Medical Mass Customisation Project Symposium), Orthopadie + Reha-Technik 2012, 15-18 May 2012, Leipzig, Germany

Putseys T. Computer assisted design of orthoses - from CAD/CAM and milling to direct design and additive manufacturing (part of the A-FOOTPRINT Project - An Industry/Academia Medical Mass Customisation Project Symposium), Orthopadie + Reha-Technik 2012, 15-18 May 2012, Leipzig, Germany

Woodburn J. A-FOOTPRINT: new generation ankle-foot and foot orthoses (part of the A-FOOTPRINT Project - An Industry/Academia Medical Mass Customisation Project Symposium), Orthopadie + Reha-Technik 2012, 15-18 May 2012, Leipzig, Germany

Pallari J. The role of customised design software in the manufacturing of customised orthotic devices. Paper presented at the Materialise World Conference 2012, 18-20 April 2012, Leuven, Belgium

2011

Munguia J. Implementing Additive Manufacturing in the Custom Orthotic industry: Productivity and design implications. Paper presented at the 2011 World conference on Mass Customization, Personalization and Co-creation, 15-16 November 2011, San Francisco, USA

Jallari J. Designing customised foot and ankle-foot orthoses - beyond state of the art. Paper presented at the International Society for Prosthetics & Orthotics UK 2011 Annual Scientific Meeting, 7-8 October 2011, London, United Kingdom

Telfer S. Biomechanical effects of extrinsic rearfoot posting in functional foot orthotics. Paper presented at the International Society for Prosthetics & Orthotics UK 2011 Annual Scientific Meeting, 7-8 October 2011, London, United Kingdom

Munguia J, Dalgarno KW, Reid, R. Fatigue behaviour of layered manufacturing parts: SLS and FDM. Paper presented at the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, 28 September-1 October 2011, Leiria, Portugal

Munguia J, Dalgarno KW, Pallari J, Cook S. A-FOOTPRINT: Ankle and Foot Orthotic Personalisation via Rapid Manufacturing. Paper presented at the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, 28 September-1 October 2011, Leiria, Portugal

Pallari J. Additive fabrication of foot orthotics - is it a good idea? Paper presented at the Podiatric Biomechanics Symposium, 16 September 2011, London, United Kingdom

Gibson K. Personalised Foot Orthotics for Rheuamatoid Arthritis patients. Paper presented at the Podiatric Biomechanics Symposium, 16 September 2011, London, United Kingdom

Woodburn J. The A-FOOTPRINT project; moving forward personalised healthcare in orthoses. Paper presented at the Podiatric Biomechanics Symposium, 16 September 2011, London, United Kingdom

Pallari, J. Design and additive manufacturing of foot and ankle-foot orthoses in the A-Footprint project. Paper presented at the 6th International Conference on Additive Manufacturing, 12-13 July 2011, Loughborough, United Kingdom

Carbes S, Torholm S, Telfer S, Woodburn, J, Oosterwaal M, Rasmussen, J. A new multisegmental foot model and marker protocol for accurate simulation of the foot biomechanics during walking. Paper presented at the XXIIIrd Congress of the International Society of Biomechanics, 3-7 July 2011, Brussels, Belgium

Munguia J. Fatigue Testing Procedures for Polymer Additive Manufacturing and Purpose-Built Rotating Fatigue Rig. Paper presented at the 12th National Conference on Rapid Design, Prototyping and Manufacturing, 17 June 2011, Lancaster, United Kingdom

Telfer S, Oosterwaal M, Torholm S, Carbes S, Woodburn, J. Generation of subject-specific datasets to develop musculoskeletal-based models of foot and ankle for orthotic design and assessment. Paper presented at 1st International Congress Scientific Testing of Orthotic Devices, 23-26 March 2011, Aix les Bains, France

Gibson KS, Telfer S, Dalgarno KW, Pallari J, Woodburn J. Personalised orthotics for rheumatoid arthritis (po4ra): phase I testing of novel devices. Paper presented at 1st International Congress Scientific Testing of Orthotic Devices, 23-26 March 2011, Aix les Bains, France

Peeraer L, Muraru L, Sevit R, Munguia, J, Dalgarno, K. Intelligent monitoring of ankle-foot and functional foot orthoses through embedded sensors. Paper presented at 1st International Congress Scientific Testing of Orthotic Devices, 23-26 March 2011, Aix les Bains, France

Pallari JHP, Munguia J, Oosterkamp J, Putseys T, Holtkamp F, Dalgarno KW. Design systems for additive fabrication of foot and ankle-foot orthoses. Paper presented at 1st International Congress Scientific Testing of Orthotic Devices, 23-26 March 2011, Aix les Bains, France

Telfer S. Biomechanical modelling of the human foot. Seminar presented at Scottish Centre for Innovation in Spinal Chord Injury, 15 March 2011, Glasgow, United Kingdom

Oosterwaal M, Telfer S, Carbes S, Torholm S, Meijer K, Woodburn J, van Rhijn LW. Generation of a dataset to develop a subject-specific, multibody, finite element, dynamic foot model. Paper presented at EUROMECH Colloquium 511, 9-12 March 2011, Ponta Delgada, Azores, Portugal

Muraru L. A-FOOTPRINT Poster Presentation. Presented at MOBILAB Symposium, 4 February 2011, Geel, Belgium

Muraru L. A-FOOTPRINT Poster Presentation. Presented at Leuven Medical Technology Centre workshop on Innovative Organisation in Health Care, 24 January 2011, Leuven, Belgium

Oosterwaal M, Meijer K, Arts C, Savelberg H, van Rhijn L. 3D dynamic biomechanical foot model - a combined multibody and finite element approach to develop optimal insoles. Paper presented at 3rd Dutch Bio-Medical Engineering Conference, 20-21 January 2011, Egmond aan Zee, The Netherlands

2010

Munguia J, Cook S, Telfer S, Woodburn J, Dalgarno K. A-FOOTPRINT: Ankle and Foot Orthotic Personalisation via Rapid Manufacturing. Paper presented at International Society for Prosthetics & Orthotics UK 2010 Annual Scientific Meeting, 4-5 November 2010, Newcastle, United Kingdom

Telfer S, Morlan G, Hyslop E, Semple R, Raffferty D, Woodburn J. A novel technique for improving marker placement accuracy. Paper presented at 2nd Congress of the International Foot and Ankle Biomechanics Community, 16-18 September 2010, Seattle, United States

Gibson K, Telfer S, Dalgarno KW, Pallari J, Woodburn J. Personalised orthotics for rheumatoid arthritis (po4ra): development of 3D kinematic and plantar pressure based design rules for commercial CAD software. Paper presented at 2nd Congress of the International Foot and Ankle Biomechanics Community, 16-18 September 2010, Seattle, United States

Munguia J. Dalgarno K. Personalised fabrication: a novel approach for foot orthotic design and manufacture. Paper presented at The International Conference on Aging, Disability and Independence, 8-10 September 2010, Newcastle, United Kingdom

Pallari JHP, Dalgarno KW, Munguia J, Muraru L, Telfer S, Gibson KS, Woodburn J. Design and layer manufacture of foot and ankle-foot orthoses. Paper presented at Twenty First Annual International Solid Freeform Fabrication Symposium, 9-11 August 2010, Texas, United States